51

CHASER

The carving professional model, created to enjoy only High-Speed turns and Deep Carving, is finally here !

このボードの開発に際しSHARKで培ったスノーバイクのシェイピングデザインをインストール。長いリアボードはTYPE-Rでお馴染みのシングルキャンバー仕様にすることで、ノーズからテールにかけてのエッジングが安定します。また、特別なファイバーグラスの組合せにより張りのあるフレックスは瞬発性を生み出しカービング時の機敏性とエッジホールドをアシストします。高速滑走時にしっかり板に乗ることで、キャンバーボードは抜群の乗り心地を提供します。キレのあるハイスピードカービングを求めるライダーにはお勧めのボードと言っても過言ではありません!
Engineered with our signature Snowbike shaping design perfected through the SHARK, this board features the iconic TYPE-R long rear board with a single camber profile, delivering rock-solid edge-to-edge stability from nose to tail.A proprietary fiberglass blend creates a snappy, responsive flex that unleashes explosive energy, supercharging your carving agility and edge hold. At high speeds, leaning hard into the camber unlocks an incredibly smooth, locked-in ride.It’s no exaggeration to say this is the ultimate weapon for riders demanding razor-sharp, high-speed carving!
*Cannot be installed on a Snowscoot.

  • メーカー小売価格 / M S R P

    ボードセット / Board Set ¥98,000 (税別 / Tax Excluded) BUY NOW

    ボード / Board Spec

    カラー
    Color

    マットレッド&マットブラック・マットブラック&マットグレー・マットブラック&マットブラック・マットレッド$マットグレー

    ベンド
    Bend

    F:フラット  R:4mmシングルローキャンバー
    F : Flat  R : Single Low Camber

    フレックス
    Flex

    F : ミディアム  R : ハード
    F : Medium  R : Hard

    コア材
    Core

    アスペン
    Aspen

    サイドウォール
    Sidewall

    ABS

    ソール
    Sole

    ISO7500  (Sintered)

    トップシート
    Top sheet

    熱可塑性ポリウレタン・UVコーティング
    Thermoplastic Polyurethane・UV Coating

    サイズ / ウエイト
    Size / Weight

    全 長 / Length : 1,930mm・全 幅 / Width : N/310mm W/273 T/319

    推 奨
    Recommend

    フリースタイルカービング 中上級者用
    Freestyle Carving  Intermediate & Advanced

    注意事項 / Notice

    ※ 本仕様は予告なく変更する場合があります。
    ※ These specifications are subject to change without notice.
    ※ ボードカラーは実際と異なって見える場合があります。
    ※ The Board color may look different from the actual color.
    ※ ボード重量につきましては、それぞれ個体差が生じます。
    ※ There will be individual differences in Board weight.
    ※ ボードは使用前に滑走に必要のない部分のエッジ(特にリアボードノーズ部分)をダリングして下さい。
    ※ Before using the Board, please dull the edges of the parts that are not necessary for gliding (Especially the rear board nose).
    ※ スノーバイク特有のマニュアル(ウイリー)走行は、ボード破損に繋がる可能性があります。十分注意して下さい。
    ※ Manual (Wheelie) riding, which is unique to Snowbikes, may lead to board damage. Please be careful.
    ※ 非貫通ブッシュを使用した場合、フロントボード(リア)とリアボード(ノーズ)が干渉します。利用される場合は干渉することを承知の上ご使用下さい。
    ※ If a non-penetrating Bush is used, the Front board (Tail) and Rear board (Nose) will interfere. If you use it, please be aware that it may cause interference.
    ※ 使用後のボードの亀裂や破損、ネジの締め過ぎによるソール面の突起及びウレタン製品の劣化は「保証範囲外」となります。
    ※ Cracks or Damage to the board after use, protrusions on the sole due to over-tightening of screws, and deterioration of urethane products are not covered by the warranty.